E
L
P

1
3

     EMERGENCY LIGHTING LUMINAIRES
     

         

     FEATURES
       * High efficiency Emergency lighting luminaries.
       * Non-Maintained mode operation.
       * Available in fluorescent type.
       * Made of high reflectance electronic-galvanized steel with corrosion resistant epoxy          powder coated finishing and prismatic acrylic diffuser.
       * Available in Recessed and Surface mounting.
       * Hi-Temp rechargeable Nickel Metal Hydride Battery with charging current 40mA-100mA          (Nominal) and 3 hours duration backup time.
       * Solid-State Electronics Fully Automatic Constant Current Charger provide high          efficiency with Trickle Charger Systems.
       * Easy to be maintained, convenient to operate, safety and reliable.
       * Red LED lighted to indicates charging.
       * Push To Test Switch to simulate power failure.
       * Operating temperature is between – 10C° to 60C°.
       * 2 Years limited warranty against manufacturer defect (condition apply).

STANDARD COMPLIED   * MS 619:PT.102:SEC.102.22:1985   * MS IEC 60598-1:2003   * Bomba & JKR Approved   * Class 1, IP-20 Luminaire

Click here to view the Model Table

E
L
P

1
8

     EMERGENCY LIGHTING LUMINAIRE
     

         

     FEATURES
       * High efficiency Emergency lighting luminaries.
       * Non-Maintained mode operation.
       * Available in fluorescent type.
       * Made of high reflectance electronic-galvanized steel with corrosion resistant epoxy          powder coated finishing and prismatic acrylic diffuser.
       * Available in Recessed and Surface mounting.
       * Hi-Temp rechargeable Nickel Metal Hydride Battery with charging current 40mA-100mA          (Nominal) and 3 hours duration backup time.
       * Solid-State Electronics Fully Automatic Constant Current Charger provide high          efficiency with Trickle Charger Systems.
       * Easy to be maintained, convenient to operate, safety and reliable.
       * Red LED lighted to indicates charging.
       * Push To Test Switch to simulate power failure.
       * Operating temperature is between – 10C° to 60C°.
       * Acrylic Diffuser also available upon request without JKR approval.
       * 2 Years limited warranty against manufacturer defect (condition apply).

STANDARD COMPLIED   * MS 619:PT.102:SEC.102.22:1985   * MS IEC 60598-1:2003   * Bomba & JKR Approved   * Class 1, IP-20 Luminaire

Click here to view the Model Table

K
E
L
U
A
R

S
I
G
N

     KELUAR SIGN LUMINAIRE
     

    

     FEATURES
       * Self-Contained Emergency ‘KELUAR’ Sign.
       * Sustained mode operation.
       * Available in fluorescent and LED type.
       * Made of high Reflectance Electronic-Galvanized steel with Corrosion Resistant Epoxy
         Powder Coated Finishing and Opal Acrylic Diffuser.
       * Available in Recessed and Surface mounting.
       * Hi-Temp Rechargeable Nickel Metal Hydride Battery with charging current 40mA-100mA
         (Nominal) and 3 hours duration back up time.
       * Solid-State Electronics Fully Automatic Constant Current Charger provide High
         efficiency with Trickle Charger Systems.
       * Easy to be maintained, convenient to operate, safety and reliable.
       * Red LED lighted to indicates charging.
       * Push To Test Switch to simulate power failure.
       * Operating Temperature is between – 10C° to 60C°.
       * 2 YEARS limited warranty against manufacturer defect (condition apply)

STANDARD COMPLIED   * MS 619:PT.102:SEC.102.22:1985   * MS IEC 60598-1:2003   * MS 983:2004   * Bomba & JKR Approved   * Class 1, IP-20 Luminaire

Click here to view the Model Table

K
E
L
U
A
R

S
I
G
N

     KELUAR SIGN LUMINAIRE
     

         

     FEATURES
       * Self-Contained Emergency ‘KELUAR’ Sign.
       * Sustained mode operation.
       * Available in fluorescent and LED type.
       * Made of high Reflectance Electronic-Galvanized steel with Corrosion Resistant Epoxy
         Powder Coated Finishing and Opal Acrylic Diffuser.
       * Available in Recessed and Surface mounting.
       * Hi-Temp Rechargeable Nickel Metal Hydride Battery with charging current 40mA-100mA
         (Nominal) and 3 hours duration back up time.
       * Solid-State Electronics Fully Automatic Constant Current Charger provide High
         efficiency with Trickle Charger Systems.
       * Easy to be maintained, convenient to operate, safety and reliable.
       * Red LED lighted to indicates charging.
       * Push To Test Switch to simulate power failure.
       * Operating Temperature is between – 10C° to 60C°.
       * 2 YEARS limited warranty against manufacturer defect (condition apply)

STANDARD COMPLIED   * MS 619:PT.102:SEC.102.22:1985   * MS IEC 60598-1:2003   * MS 983:2004   * Bomba & JKR Approved   * Class 1, IP-20 Luminaire

Click here to view the Model Table

P
A
N
E
L

O
P
T
I
O
N
S

     EMERGENCY LIGHTING LUMINAIRES
     Panel Options

Metal Frame for KSP 28F, KSP 15L Model Metal Frame for KSP 28FD, KSP 15LD Model Clear diffuser for KSP 213D & KSP 213LD Model

Opal diffuser for KSP 28FD & KSP 15LD Model Metal Frame for KSP 28FD, KSP 15LD Model Clear diffuser for KSP 213 & KSP 213L Model

P
O
W
E
R

P
A
C
K

     EMERGENCY LIGHTING ACCESSORIES
     (Powerpack)

    

     FEATURES
       * Non-Maintained mode operation.
       * 230/240V ± 10% - 50Hz input Voltage.
       * Available in Fluorescent lamp from 18W to 65W. It also suitable for PLL Lamp (Please
         consult with manufacturer).
       * Made of High Reflectance Electronic-Galvanized steel with Corrosion resistant Epoxy
         Powder Coated Finishing.
       * Using Hi-Temp Rechargeable Nickel Cadmium Battery Charging Current 40mA-100mA
         (Nominal) and 3 hours duration back up time.
       * Ni-MH battery is also available (Optional).
       * Solid-State trickle charger with over charge protection.
       * Low voltage cut off to prevent overcharge of battery and protect lamp lifespan.
       * Easy to install, convenient to operate, safety and reliable.
       * Red LED lighted to indicates charging.
       * Push To Test Switch to simulate power failure.
       * Operating temperature is between - 10C° to 60C°.
       * 2 YEARS limited warranty against manufacturer defect (condition apply).

STANDARD COMPLIED   * MS 619:Part 102:Sect. 102.22:1985   * MS IEC 60598-1:2006

Click here to view the Model Table

P
O
W
E
R

P
A
C
K

     EMERGENCY HALOGEN ACCESSORIES
     (Powerpack)

         

     FEATURES
       * High efficiency emergency lighting luminaries.
       * Non-Maintained mode operation.
       * Low voltage Halogen Lamps (6V – 10W ).
       * Made of 0.5mm Cold Roll steel with Epoxy powder coated finishing.
       * High-Temp. Rechargeable Sealed Lead Acid Battery with charging current 300mA (Nominal)
         and 3 hours duration backup time.
       * Solid-State Electronics Fully Automatic Constant Current Charger provide high
         efficiency with Trickle Charger Systems.
       * Easy installation, safety and reliable.
       * Red LED lighted to indicates charging.
       * Equipped with Push To Test Switch to simulate power failure.
       * Operating temperature is between –10C° to 60C°.
       * Low Voltage Cut-Off to Prevent Over Discharge Of Battery.
       * 2 Years limited warranty against manufacturer defect (condition apply).

STANDARD COMPLIED   * MS 619:Part 102:Sect. 102.22:1985   * MS IEC 60598-1:2006   * Bomba Approved   * Class 1, IP-20 Luminaire

Dimension Table      Click here to view the Model Table

P
O
W
E
R

P
A
C
K

     TWIN HALOGEN LAMP
     (Powerpack)

         

     FEATURES
       * Wide varieties of ballast for different type of lamps.
       * Reduction on consumption of electrical energy.
       * Flicker free for Maximum ENERGY SAVING.
       * Low total HARMONIC DISTORTION.
       * Noiseless and highly reliable.        * Low temperature rise.
       * Long life services.
       * Easy installation.
       * 220V/ 60Hz available on request

STANDARD COMPLIED   * MS 141 :PT.2:1993   * MS IEC 61347-1:2003   * MS IEC 61347-2-8:2003

Dimension Table      Click here to view the Model Table